QUICK FACTS

Pressure Washer Quick Facts

CALL 1-800-888-2468 EXT. 2,1

TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU

FOR REPAIRS AND SERVICE PART PURCHASES.

GAS

Use fresh high quality gas.

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

 

 

 

Pump oil: Refer to owners manual supplied with this unit.

OIL

Engine oil: Refer to engine manual supplied with this unit.

Some units are equipped with a low oil sensor and adequate oil must be added or

 

 

the unit will not start.

 

Use only cold water.

WATER

Don’t operate unit with clogged or missing water filter/screen.

Don’t operate unit without adequate water supply to pump. Adequate water supply is

 

 

a minimum of 20 psi and 5 gpm.

 

 

PRESSURE

The pressure setting is preset at the factory to achieve optimum cleaning. If you

ADJUSTMENT

need to lower the pressure setting, refer to the owners manual for proper procedure.

 

 

 

Pull gun trigger every 2 minutes while engine is running.

PUMP

Don’t allow water to freeze in pump.

 

Siphon RV antifreeze into pump for cold weather storage or long term storage.

 

 

BY-PASS

Never leave unit running for more than 2 minutes without pulling gun trigger; doing so

MODE

will destroy pump and void warranty.

 

 

THERMAL

Pump is equipped with a thermal relief valve. If the water overheats, this valve will

open and allow a gush of water to escape. Once the water is released, the valve

RELIEF VALVE

closes allowing the pump to operate normally.

 

 

HOSE

Don’t allow hoses to contact the HOT engine muffler during or after use.

Never pull the hose to move the unit.

 

 

Do not adjust or attempt maintenance without consulting engine manual or an

ENGINE

authorized engine service center.

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

 

Always turn on the water before starting the engine.

 

 

SOAP

Use only soaps and chemicals designed for pressure washer use.

CHEMICALS

 

 

 

NOZZLE

Keep nozzle unclogged. Refer to manual for cleaning procedures.

Chemical/soap cannot be siphoned in high pressure setting. Only in low setting.

 

 

 

MAINTENANCE

Follow recommended maintenance schedule for engine & pump. Refer to manuals.

SCHEDULE

 

STORAGE

Draw clean water through chemical inlet.

OR

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

WINTER

Don’t allow water to freeze in pump, gun, wand or hoses.

STORAGE

Siphon RV antifreeze into pump for cold weather storage or long term storage.

 

 

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615

Page 20
Image 20
DeVillbiss Air Power Company MGP-2225CWH owner manual Pressure Washer Quick Facts