GENERAL PARTS IDENTIFICATION
1.Frame assembly- Protects pump and engine as well as a means to handle complete unit.
2.Exhaust Muffler- Allows hot exhaust to exit the engine.
3.Siphon Tube & Filter- Used to pick up deter- gents, degreasers, etc. for cleaning.
4.High Pressure Hose- 25' x 1/4" dia. high pressure hose used to transport water from pump to gun.
5.Quick Connect Coupler- Used to attach water hose to pump.
6.Pressure Washer Gun- Used to control flow of water coming from pump.
7.3.5 HP Tecumseh Engine- This engine is shipped without oil. Included with this pressure washer is a copy of the Engine Manufacturer's Operators' Manual. See this manual for more detail on the engine.
8.Air Filter- Contains air filter element. Refer to the Engine Operators' Manual for maintenance.
9.Gas Tank- Refer to the Engine Operators' Manual for suggested fuel.
10.Pressure Washer Pump- Delivers 1400 PSI at 2.0 gpm for optimal cleaning. Pump is shipped with oil. No oil should be added to this pump.
11.Vibration Isolator- Isolators reduce frame vibration and eliminates walking.
12.Wand & Nozzle- Metal thru construction with brass thread connection and durable stainless steel nozzle for added durability.
13.Pressure Regulator- used to adjust pressure of water coming from pump. Can be adjusted from
14.Handle Assembly Instruction- Remove nuts and bolts from parts bag. Install handle into position. Push bolts through holes provided. Install hex nuts to bolts
and tighten.
7
