DeWalt DP2800, A16505 instruction manual For Future USE Installation, Pressure Washer Assembly Fig

WARNING: RISK OF electrical Shock

What can happen How to prevent it

2.	Attach high-pressure hose (C) to spray gun (D). Make sure it is
	secure.
3.	Connect wand (E) to spray gun. Make sure connection is
	secure.

•Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.

•Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.

English

4. Place the nozzle holder (G)

WARNING: RISK OF INJURY FROM LIFTING

What can happen How to prevent it

onto the panel assembly (F) and push each nozzle holder into place.

5. Remove the five colored

•Serious injury can result from attempting to lift too heavy an object.

•The pressure washer is too heavy to be lifted by one person. Obtain assistance from others before lifting.

quick-connect nozzles from the plastic bag and insert

them into correct grommet on the nozzle holder. Nozzles are color coded to match colored

SAVE THESE INSTRUCTIONS

FOR FUTURE USE INSTALLATION

Pressure Washer Assembly (Fig. 1)

1.Place handle assembly (A) onto frame, depress the snap buttons, and slide the handle assembly onto the frame (B) until snap buttons are secured in place.

Caution: Risk of personal injury. Avoid placing hands between handle and frame when assembling to prevent pinching.

nozzles on panel assembly.

NOTE: The high-pressure pump was filled with oil at the factory. Always check oil level before using (refer to Maintenance for more information).

Warning: Risk of bursting. Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to pre- vent over inflation.