As little as 10% lower voltage can cause loss of power and can result in overheating. All DEWALT tools are factory-tested; if this tool does not operate, check the power supply.

English

ADJUSTMENTS AND SETUP

 

 

WARNING: To reduce the risk of serious personal injury,

 

turn tool off and disconnect tool from power source before

 

making any adjustments or removing/installing attachments or

 

accessories.

Attaching And Removing Blades (Fig. 1–4)

To attach the blade, retract lower blade guard (F) and place inner clamp washer (G) and blade on saw spindle with printed side of blade out. [Teeth at bottom of blade pointing forward, Fig. 2]. Place outer clamp washer (H) on saw spindle. The larger surfaces of both washers must face the blade. Thread on blade clamping bolt (E) firmly by hand to hold both blade washers in position. Depress the lock pin (I, Fig. 3) and turn the saw spindle until lock pin engages the shaft. Tighten blade bolt clockwise with blade wrench.

FIG. 3

FIG. 4

I

Changing Blades (Fig. 1–4)

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before

making any adjustments or removing/installing attachments or accessories.

Your DEWALT saw is equipped to accept blades with 5/8" (16 mm) round arbor holes.

1.Depress LOCK PIN, (I, Fig. 3) and turn blade until the LOCK PIN locks firmly into the saw shaft.

2.With blade wrench, loosen and remove the blade bolt (E) by turning it in a counterclockwise direction when facing blade (right hand thread). Retract lower blade guard (F) and remove blade.

3.When mounting new blade, the teeth must point in the direction of blade rotation. Replace outer clamp washer (H). Replace and tighten the blade bolt as much as possible with the fingers, then tighten firmly with the blade wrench.

Cutting Depth Adjustment (Fig. 5–7)

Hold the saw firmly. Raise the depth adjustment lever (J, Fig. 5) to loosen and move shoe to obtain the desired depth of cut, as shown. Make sure the depth adjustment lever has been retightened (lowered) before operating saw.

FIG. 5

LOOSEN

K

J

TIGHTEN

6

Page 8
Image 8
DeWalt DW366 Adjustments and Setup, Attaching And Removing Blades Fig, Changing Blades Fig, Cutting Depth Adjustment Fig

DW366 specifications

The DeWalt DW366 is a powerful and versatile cordless jig saw designed for both professionals and DIY enthusiasts. This tool is part of the DeWalt 18V battery platform, ensuring that it is compatible with a range of other DeWalt cordless tools. As a user-friendly and efficient saw, the DW366 offers several features that enhance precision and performance, making it ideal for a variety of cutting applications.

One of the standout features of the DeWalt DW366 is its ergonomic design. The tool is lightweight, which reduces user fatigue during extended periods of use. The rubber over-molded handle provides a comfortable grip, allowing for better control and maneuverability. Additionally, the saw includes a variable speed dial, enabling users to adjust the cutting speed according to the material being worked on, from softer woods to tougher materials.

The DW366 is equipped with a powerful motor that delivers up to 3,000 strokes per minute, providing quick and efficient cuts. This high-speed operation helps to enhance productivity on the job. The saw's unique orbital action feature further boosts cutting efficiency by enabling a more aggressive cutting motion. Users can select from multiple orbital settings to cater to specific tasks, whether it's cutting curves or making straight cuts.

Another impressive aspect of the DeWalt DW366 is its tool-free blade change system. This feature allows users to quickly and easily swap out blades without the need for additional tools, reducing downtime and increasing job efficiency. The saw also offers a built-in dust blower, which helps keep the cutting line clear and visible, ensuring enhanced accuracy during cutting operations.

Additionally, the DW366 has a durable construction, equipped to handle job site demands. The robust design, combined with a replaceable shoe cover, helps protect the tool from wear and tear, prolonging its lifespan.

In summary, the DeWalt DW366 offers an exceptional combination of power, versatility, and user-friendly features. Its ergonomic design, variable speed settings, orbital action, and tool-free blade changes make it an excellent choice for anyone in need of a reliable and efficient jig saw, whether for professional projects or home improvement tasks. With the added assurance of being part of the DeWalt 18V system, users can expect consistent performance and compatibility across various tools.