DeWalt N000589 instruction manual Operation, Pressure Adjustments, Spray Wand Nozzles Fig

English

6. Remove	the	five
colored	quick-		B
connect nozzles from
the plastic bag		and	A
insert	them	into

correct grommet on

the nozzle holder. Nozzles are color coded to match colored nozzles on panel assembly.

NOTE: The high-pressure pump was filled with oil at the factory. Always check oil level before using (refer to Maintenance for more information).

Warning: Risk of bursting. Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to prevent over inflation.

OPERATION

Pressure Adjustments

The pressure setting is preset at the factory to achieve opti­mum­ pressure­ and cleaning. To lower the pressure,­ follow these instruc- tions.

1.Back away from the surface­ to be cleaned. The further away you are, the less the pressure will be on the surface to be cleaned.

2.Change to the 40˚ nozzle (white). This nozzle delivers a less powerful stream of water and a wider spray pattern. Refer to Spray Wand Nozzles.

Caution: DO NOT attempt to increase pump pressure. A higher pressure setting than the factory set pressure may damage pump.

Spray Wand Nozzles (Fig. 1)

The nozzles for the spray wand are stored in the nozzle holder (B) on the panel assembly (A). Colors on the panel identify nozzle location and spray pattern. Refer to the following chart to choose the correct nozzle for the job to be performed.

Nozzle Color	Spray Pattern	Uses	Surfaces*
	0˚	powerful	metal or
Red		pinpoint for	concrete;
		very intense	DO NOT use
		cleaning	on wood
	15˚	intense	metal, concrete
Yellow		cleaning of	or wood
		small areas
	25˚	intense	metal, concrete
Green		cleaning of	or wood
		larger areas
	40˚	covers wide	metal, concrete,
White		areas of	wood or vinyl
		cleaning
	low pressure	applies cleaning	metal, concrete,
		solutions	wood or vinyl
Black

10