address is 192.168.0.100 from 80 to 8080, the User must type in the web browser “http://192.168.0.100:8080” instead of “http://192.168.0.100”.
Streaming
“Control channel port” This can be something other than the default port 5001 in order to work with the port opened by the firewall.
“Audio channel port” This can be something other than the default port 5002 in order to work with the port opened by the firewall.
“Video channel port” This can be something other than the default port 5003 in order to work with the port opened by the firewall.
“Improve audio quality in low bandwidth environment” If the Network Camera seems to work in a low bandwidth network environment, the User can use this option to see if audio quality can be improved by sacrificing some
WLAN Configuration For Wireless Model Only
“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32
“Wireless mode” Clicking on the
“Infrastructure” Make the Network Camera connect to the WLAN via an Access Point. (The default setting)
“Channel” While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In
“TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.
31
