
A The MPEG4 codec engine can process up to 30 frames per second internally. However, the total performance is subject to many coefficients such as:
1.Network throughput,
2.Bandwidth share,
3.Number of users,
4.The complicated/detailed objects and movement in view,
5.The power of your PC or notebook computer that is responsible for displaying images.
In general, the transfer rate in a general local network environment can achieve over
200kilobytes per second and approximately 10 to 20 pictures per second from a regular environment.
Q How can I keep the Network Camera as private as possible?
A The Network Camera is designed for surveillance purposes and has many flexible interfaces. The user authentication and special confirmation in installation can keep the Network Camera from unauthorized access. You may also change the HTTP port to a
Q Why can I not access the Network Camera when I set up some options in the application?
A Since the Network Camera is a "network camera", any incorrect network settings will make it inaccessible. If this happens, restore the factory default settings following the procedures in Appendix A.
Q Why can I not connect the I.E. to the Network Camera when I find the IP address of the Network Camera?
A When you find the Camera’s IP address from “Current IP Address”, but your can’t connect the I.E. to the Camera after you click on “Link to selected device” button. It means your LAN is not 192.168.0.xxx, the IP address of the Network Camera must be set from a PC (workstation) on the same subnet.
1.Write down the Camera IP address for later use example 192.168.0.99. You’ll probably have a different IP address.
2.Find the IP address of your PC, example 192.168.300.25. You’ll probably have a different IP address.
50