PCI/ISA System Board
Step 5
Remove the G586OPC from its original packing box.
Be careful to avoid touching all connectors and pins on
the board. Please refer to the handling instructions on
pages 6-8 for proper handling techniques.
Step 6
Insert the SIMMs into the SIMM banks on the
G586OPC. The quantity and location of the SIMMs is
dependent upon the memory configuration and type of
modules you intend to use.
Step 7
Install the CPU. Be sure pin 1 of the CPU is aligned
with pin 1 of the socket.
Step 8
Set the corresponding jumpers.
Step 9
Install the prepared G586OPC system board into the
case and replace the screws.
Step 10
Reinstall all cards and connectors and replace the sys-
tem unit cover. Reconnect all power cords and cables.
59