Quick Setup Guide

1.3.14 DIMM and PCI Standby Power LEDs

￿

Guide

Quick Setup

3.3VSB Standby for PCI - Jumper JP3

1

2

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On: Default

3.3VSB Standby Power to PCI slots - PCI 2.2 spec.

DIMM Standby Power LED

Off:

Non-PCI 2.2 spec.

This LED will turn red when the system’s power is on or when it is in the Suspend state (Power On Suspend or Suspend to RAM). It will not light when the system is in the Soft-Off state.

PCI Standby Power LED

This LED will turn red when the system is in the power-on, Soft-Off or Suspend (Power On Suspend or Suspend to RAM) state.

Important:

Lighted LEDs serve as a reminder that you must power-off the system then turn off the power supply’s switch or unplug the power cord prior to installing any memory modules or add-in cards.

17

Page 17
Image 17
DFI NB32-SL, NB32-SC manual Quick Setup Guide Dimm and PCI Standby Power LEDs, 3VSB Standby for PCI Jumper JP3 On Default