DFI NB32-SL, NB32-SC manual Using the Suspend to RAM Function

English

2.2 Using the Suspend to RAM Function

If you are using the Windows® 98 operating system, please follow the steps below.

1.Select “Power Management Setup” in the main menu screen and press <Enter>.

2.In the “ACPI Function” field, select “Enabled”.

3.In the “ACPI Suspend Type” field, select “S3(STR)”.

4.Press <Esc> to return to the main menu.

5.Select “Save & Exit Setup” and press <Enter>. Type <Y> and press <Enter>.

6.Install Windows® 98 by typing the following parameter. This is to ensure that the ACPI function is supported.

[drive]:>setup /p j

If you have previously installed Windows® 98, you need to upgrade the system in order to support ACPI. Please contact Microsoft for upgrade information.

7.Boot Windows® 98. In the Windows® 98 desktop, click the Start button. Move the cursor to Settings, then click Control Panel.

To check whether ACPI was properly installed, double-click the System icon. In the System Properties dialog box, click the “Device Manager” tab. In “View devices by type”, click “System devices”.

8.Double-click the System icon. In the System Properties dialog box, click the Performance tab.

9.Click File System. In the “Typical role of this computer” field, select “Mobile or docking system”. Click Apply, then click OK. Restart the computer.

10.Repeat step 7 to open the Control Panel dialog box. Double- click the Power Management icon.

English

33