Diamond Audio Technology S400 Crossover, Rear Fill Driver, HEX Tweeter, HEX Midrange Midbass

The HEX™ Series 2-way systems S400, S500 and S600 include an RAF “rear-fill” output as part of the crossover design. The RAF output is unfiltered to maintain a correct phase relationship to the front stage, however, the output is attenuated by -10dB to optimize for typical vehicle size and length. Rear-fill drivers are available separately from your DAT dealer.

As shown in diagram ￿ below, (1) connect the amplifier’s speaker output (observing correct polar- ity) to the crossover’s INPUT terminals. Then, (2) connect the terminals labeled WOOFER to the woofer/midbass driver (i.e., S4.0m, S5.0m or S6.0m). (3), connect the TWEETER terminals to the S.0ta/S.0ts tweeter. The RAF outputs (4), connect to the rear-fill driver. We suggest using the S4.0m or S5.0m as the sound is “timbre-matched” to the front system.

Crossover

- +

Rear Fill Driver

	INPUT	WOOFER		TWEETER			REAR
-	+	-	+	-	+	-	+

HEX Tweeter

- +

HEX Midrange/

Midbass

￿Front Stage with Rear-Fill system. Easy with the flexible HEX systems.