“Before you begin…”
Make sure you have all the needed parts to complete the installation:
(2) HEX™S.0ta or S.0ts Tweeters
(2)HEX™ S4.0m, S5.0m or S6.0m Midrange/Midbass/Woofer Drivers
(2)HEX™ S4.0x, S5.0x or S6.0x Computer Optimized Crossovers
(2)HEX™ Grilles w/ Mounting Rings
(2)Mounting Gasket Sets
(1)Tweeter Mounting Kit
(2)Driver Mounting Kits
“Some considerations…”
…am I proficient with hand tools?…am I willing to learn via *M.I.T. “vocational training”?…should I void my
I need to remove the entire door panel to finish this job?…am I really prepared to put a hole in my door panel?… do I have the tools and the skill?… If not, you should have this system professionally installed by your authorized Diamond Audio Dealer. *(Mistakes I’ve Tried)
“Basic tools…”
•#0/1, #2 Phillips screwdriver
•Electric drill and 1/8” (3mm) bit
•2” (50mm) hole saw
•Wire strippers/cutters
•Metal cutting tool
•Metal file
•Safety glasses
THIS MANUAL ASSUMES THAT THE INSTALLER HAS SIGNIFICANT EXPERI- ENCE INSTALLING HIGH PERFORMANCE SEPARATE COMPONENT MOBILE SPEAKER SYSTEMS!
“Installation…”
1.) Install the HEX midrange/ midbass/woofer drivers. (refer to “Mounting…”)
2.) Install the crossovers. Make sure you have enough wire to reach all the drivers from the intended mounting location(s).
3.) Install the HEX tweeters. Try listening to the tweeters in several positions to get the best imaging results BEFORE YOU CUT YOUR PANELS! Remember: the best visual location may not be the best sounding one. Listen to the system with the tweeter connected