16
Clone Mode Settings
ATI Overlay Tab
Brightness Use this slider to adjust the brightness of the video
image.
Contrast Use this slider to adjust the contrast in the video
image.
Saturation
Use this slider to adjust the vividness of the color.
Sliding it all the way to the left removes all color
and produces a black and white picture.
Hue Use this slider to adjust the pureness or tint of the
red, green and blue components of the color.
Gamma Use this slider to adjust the overall intensity of the
video image.
Clone mode
options
Click this button to access Clone Mode overlay
settings.These settings only apply to video content
when viewed in dual-controller Clone mode.
Defaults
button
This allows you to reset the Overlay settings to
default values.
Theater Mode
This allows you to display video playback in full
screen on a secondary monitor, if available and
enabled.
Clone Mode Options
Standard Video content is displayed on your Primary display
only.
Theater Mode
Video content is displayed on your Primary and
Secondary displays. Video content is displayed on
your Secondary display(s) is always in full screen
mode. Note: your computer must be set for 16-bit
color depth or higher to use this mode.