500Ub Upright Assembly Drawing

6

500Ub.Sr OM R1.indd 6-7

500Ub Upright Assembly Instructions

Step 1: Stabilizer Bars Assembly

1. Place rear stabilizer bar under rear main frame body and align screw holes.

2. Insert two M8 x 75mm bolts into the stabilizer bar all the way through and into the holes on the frame

3. Secure rear stabilizer bar using an M8 nut and a curved washer on each bolt.

4. Repeat steps 1 – 3 to attach front stabilizer bar.

Step 2: Pedal Assembly

1. Use a 15mm open-end wrench to fi rmly affi x the pedals to the cranks.

2. The left and right pedals are different and are denoted as right or left (R or L) on the top & bottom of each pedal.

NOTE: Left pedal threads counterclockwise.

3. Retighten cranks after approximately 10 hours of use.

Step 3: Seat Post and Saddle assembly

1. Loosen the seat pin by turning it counter-clockwise 1-2 turns. Install seat post by slid- ing it into seat post receptor, pulling the seat pin out until a suitable hole is found.

2. Assemble saddle onto seat post.

3. Tighten the affi xing nut and washer using a 17mm open-end wrench.

SADDLE ANGLE ADJUSTMENT HINT: Hold the rear of saddle in the optimum comfort position and tighten the nut at the same time

Step 4: Console Mast Assembly

1. Remove console mast plastic cover from the unit's body by un-snap- ping it.

2. Install console mast plastic cover onto console mast.

3. Connect the main wire harness in the main frame to the main wire har-

ness in the bottom of the console mast, taking care to install correctly.

(See plug alignment marks)

4. Install the console mast by sliding it into the console mast receptor while gently pulling the wiring harness. This will keep the slack out of the harness so the wires will not get pinched and short out. Insert and tighten three M8 x 16mm bolts, one fl at washer on each side and a curve washer on the front using a 6mm Allen wrench. Be sure not to pinch wire harness while tightening these three screws and make sure that the two top holes are light up with the holes on the receptor.

5.Snap console mast plast cover into top of sidecase.

6.Insert and tighten two M8 x 16mm bolts and fl at washers onto the two holes above the console mast

7

6/11/2008 9:54:18 AM

Page 3
Image 3
Diamondback 500Sr manual 500Ub Upright Assembly Drawing, 500Ub Upright Assembly Instructions

500Ub, 500Sr specifications

The Diamondback 500Sr and 500Ub are impressive additions to the world of advanced bicycles, designed for cyclists who demand performance, versatility, and style. These models embody a perfect balance of cutting-edge technology and innovative design, catering to both enthusiasts and everyday riders.

The Diamondback 500Sr features a lightweight aluminum frame that provides durability without sacrificing agility. This frame design not only enhances performance but also allows for improved handling in various terrains. Its sleek geometry ensures that riders experience optimum comfort during both short rides and long-distance journeys.

One of the standout features of the 500Sr is its high-quality suspension system. Equipped with a responsive front fork, it absorbs shocks from rough terrains, making it ideal for mountain trails or bumpy surfaces. The adjustable settings on the suspension allow riders to customize their experience, enhancing both comfort and control based on their riding style.

On the other hand, the Diamondback 500Ub is designed specifically for urban environments. This model emphasizes stability and maneuverability, making it an excellent choice for commuters navigating city streets. The 500Ub features a strong yet lightweight frame, complemented by a comfortable saddle and ergonomic handlebars, promoting an upright riding position that reduces strain during longer rides.

Both models are equipped with advanced braking systems. The 500Sr boasts hydraulic disc brakes, providing precise stopping power in all weather conditions, while the 500Ub features reliable mechanical disc brakes that ensure safety without adding unnecessary weight.

Technology also plays a crucial role in these bicycles. The 500Sr comes with a wide range of gear options, featuring a 1x drivetrain system that simplifies shifting while enhancing reliability. Conversely, the 500Ub is outfitted with a practical gear setup suited for urban navigation, facilitating quick gear changes that accommodate varying terrain and traffic conditions.

In terms of aesthetics, both models showcase stylish designs and appealing color options, making them visually appealing to riders of all ages. The attention to detail in craftsmanship ensures that each bike not only performs well but also looks great on the road.

In conclusion, the Diamondback 500Sr and 500Ub stand as excellent choices for those seeking high-performance bicycles. With their distinctive features, advanced technology, and thoughtful design, these models cater to a range of cycling needs, whether tackling challenging trails or maneuvering through city streets. Riders can expect a reliable and enjoyable cycling experience with either option.