Edgeport/2c | Digi 1 specification

Edgeport/2c

The Edgeport/2c is an intelligent expansion module that connects to a PC or server running Windows 98, SE, CE, Me, NT 4.0, 2000 and Windows XP via the Universal Serial Bus (USB), providing high-speed serial connectivity. For more detailed information as well as the latest manual and technical updates, visit our website at www.digi.com.

Cabling Edgeport

Type A

Plug the USB cable (with the Type A plug) into a USB port located on your PC or into an available USB port on a standard hub or into a Digi Hubport.

If the drivers are not already installed, go to "Edgeport Driver Installation” on page 7.

Edgeport Installation Guide (90000403 Rev. G) – Page 5

Image 7

Digi 1 manual Edgeport/2c

Contents

Edgeport Table of Contents Edgeport Products Edgeport/8r RJ-45 Pin Assignments Cabling EdgeportEdgeport/8rr RJ-12 Pin Assignments Using the Printer Port Installing the Hub DriversEdgeport/21 Edgeport/42, Edgeport/421 Edgeport/416 Edgeport/2c Edgeport/21c, Edgeport/22c Installing the Printer PortFor Windows 98, CE, SE, Me, 2000, and XP Users For Windows NT Edgeport Driver InstallationFor Windows XP, 2000, and 2003 Server For Windows 98, and Me Edgeport Installation Guide 90000403 Rev. G For All Edgeports except the Edgeport/1 System Status Light For all Edgeport Products except Edgeport/416 Mounting Diagrams For All Windows Operating Systems Edgeport Utility ProgramGeneral Tab Edgeport Installation Guide 90000403 Rev. G Fast Reads Edgeport Installation Guide 90000403 Rev. G Version Tab Advanced Tab Understanding Hubs Example of a Typical Hub Configuration FCC Regulation Part 15 Declaration of Conformity DoC Regulatory & Other InformationFor U.S. Government use For non-U.S. Government use EMC European Community CE Mark Declaration of Conformity DOC EN55022 UL/CSA Safety InformationEuropean Contact Digi International