Click OK
2.3 Configure the Default Routes
It is necessary to configure two default routes, one for PPP 1 and one for PPP 4. The PPP 1 default route needs to be set so PPP 4 is deactivated when PPP 1 returns to service after a successful recovery.
Configuration - Routing > Default Route 0
Parameter | Setting | Description | |
Interface | PPP | Default route 0 is via PPP 1 | |
|
| ||
Interface # | 1 | ||
| |||
Deactivate interface | PPP | PPP 4 will be deactivated when this route | |
Deactivate interface # | 4 | comes back into service after an outage |
Click OK
The configuration of default route 1 should be configured as shown.
Configuration - Routing > Default Route 1
Parameter | Setting | Description | |
Interface | PPP | Default route 1 is via PPP 4 | |
|
| ||
Interface # | 4 | ||
| |||
|
|
| |
Deactivate interface | None | This will allow for recovery to ADSL | |
|
| ||
Deactivate interface # | 0 | ||
|
8
