Specifications and Dimensions, Troubleshooting

Specifications and Dimensions:

Dimensions:		Operation Temperature:
Length:	3.882” in / 9.860cm	Ambient temperature: 10ºC to 45ºC (50ºF to 131ºF)
Width:	1.679” in / 4.264cm	Relative humidity: 5% to 90% (non-condensing)
Depth:	0.983” in / 2.496cm	Power Requirement:
Weight:	2.29 oz / 65 g	Power Requirement:
		9-30Vdc @ 0.5A max
		Regulatory Approval:
		FCC Part 15 Subpart B, Class A
		EN55022, Class A
		EN55024
		EN61000-3-2,3
		UL60950
		CAN/CSA C22.2 No.60950
		EN60950

Figure 4.

•Link LED or ACT not turning on when unit is powered

-Power down unit, re-power unit and push and hold reset button for 10-12 seconds.

•Software cannot find or conflicts within comports

-Make sure you have the Diagnostic Loop Back securely connected to the serial port of model 50461.

-Make sure Ethernet cable is not defective or incorrectly wired.

-If you have a Lantronix comport redirector installed on the same computer, you will need to un-install the software.

•Unit not communicating with software

-Make sure dip is set to dip 1 on and dip 2 to 4 is off.

-Make sure Ethernet cable is not defective or incorrectly wired.

-Make sure the DB9 Adapter is securely connected to the serial port of model 50461

-Make sure you have the 24” data cable from the Ethernet connect to right port of Smartlog X3 (labeled RS-232)