Digi M10 manual Reference Documents, Where to Get Help

Digi m10 Technical Overview

Reference Documents

The following documents were used to create this user guide, and provide more information about the technologies and standards involved using the Digi m10 ORBCOMM Satellite Modem.

Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests, MIL STD 810E

European Telecommunications Standards Institute, EN 300 832 (A1 version 1.1.1), Electromagnetic Compatibility for Mobile Earth Stations.

International Electrotechnical Commission, IEC 1000-4-4, Testing and Measurement Techniques -- Immunity to Fast Transient / Burst Immunity Test.

International Electrotechnical Commission, IEC 61000-4-6, Testing and Measurement Techniques -- Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields.

ORBCOMM Serial Interface Specification, E80050015.

ORBCOMM Subscriber Communicator (SC) Standards and Specifications, E25050102.

ORBCOMM Subscriber Communicator Type Approval Plan, A25TP0017.

ORBCOMM System Overview, A80TD0008.

RoHS FAQ --http://www.rohs.gov.uk/FAQs.aspx#10

Society of Automotive Engineers, SAE J1455, Joint SAE / TMC Recommended Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks).

Technical Requirements for Satellite Earth Stations and Systems (SES); Mobile Earth Stations (MES) Providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz, EN 3200 721.

Where to Get Help

For additional information or clarifications regarding this user manual, please get in touch with Digi International using the contact information provided below.

Address 11001 Bren Road East

Minnetonka, MN 55343

Phone 952-912-3456

E-mailhttp://www.digi.com/support/eservice/login.jsp

Digi International, Inc. © 2009 Page 7 of 26