Digi X4, X8, X2 manual Snmp

C o n f i g u r e D i g i d e v i c e s

Service	Services provided	Default
		network
		port
		number
Secure Shell (SSH)	Allows users secure access to log in to the Digi device and	22
	access the command-line interface.
Secure Shell (SSH) Passthrough	Accessing a specific serial port set up for SSH.	2501
Secure Socket Service	Authentication and encryption for Digi devices.	2601
Simple Network Management Protocol	Managing and monitoring the Digi device.	161
(SNMP)	To run SNMP in a more secure manner, note that SNMP
	allows for “sets” to be disabled.This securing is done in
	SNMP itself, not through this command.
	If disabled, SNMP services such as traps and device
	information are not used.
Telnet Server	Allows users an interactive Telnet session to the Digi	23
	device’s command-line interface.
	If disabled, users cannot Telnet to the device.
Telnet Passthrough	Allows a Telnet connection directly to the serial port, often	2001
	referred to as reverse Telnet.
Transmission Control Protocol (TCP)	Used for testing the ability to send and receive over a TCP	7
Echo	connection, similar to a ping.
Transmission Control Protocol (TCP)	Allows a raw socket connection directly to the serial port,	2101
Passthrough	often referred to as reverse sockets.
User Datagram Protocol (UDP) Echo	Used for testing the ability to send and receive over a UDP	7
	connection, similar to a ping.
User Datagram Protocol (UDP)	Allows raw data to be passed between the serial port and	2101
Passthrough	UDP datagrams on the network.

8 5