THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective owners.
Modem GSM
Digicom Modem GSM is compliant with most applications actually used with the traditional analog modems. The modem is managed through the AT commands and the ETSI 07.07 and 07.05 standard; it allows Transparent or Non Transparent (with RLP Radio Link Protocol) data transmission.
V.110 protocol is supported for a direct connection to ISDN devices and for an immediate connection.
Also the SMS protocol and the services included into this protocl are supported.
Modem GSM has a 9 pin serial interface, while the power supply cabling uses the typical connectors of automotive solutions to guarantee the maximum reliability.
The SIM slot and the SIM Holder have been projected to be easily installed and maintained. The SIM can be removed by simply acting with a point or a pen.
Thanks to the Flash technology, Modem GSM is local and remote upgradable.It is possible to transfer the updating of the new code. Then the microprocessor on board will automatically reload the Flash and no operator is needed.
Furthermore, Modem GSM can be remote configurated in order to carry out any modifications or test needed.
The maximum security is guaranteed by a sophisticated system of access control, based on the Caller Identification (CLI) that will give access only to authorized users.
Modem GSM is inserted into a plastic case with holes for the wall mounting.
MOBILE & WIRELESS
For further information: international@digicom.it or http://www.digicom.it
