DigiPower warranty Item No. ACD-100, Package Includes, Instructions, Universal AC Power Supply

®

Item No. ACD-100

Universal AC Power Supply

For Use With Digital Cameras

Thank you for purchasing the newest addition to the DIGIPOWERâ line of Universal Power Products. Now, you no longer need to purchase many adaptors for your different products. This one simple Universal Adaptor is easy to use and specifically designed for use with your Digital Camera. Unlike other AC Adaptors, the ACD-100changes Voltage and Amperage with each Voltage setting, making this a truly dedicated adaptor. It comes with nine different Voltage settings and four pin connectors to fit almost any Digital Camera. Please be sure to carefully read the instructions and precautions below.

PACKAGE INCLUDES:

1 Universal AC Adaptor

4 Pin Connectors, labeled D,E,F and G.

1 Voltage Selector Tool – located on side of the adaptor 1 Compatibility Chart for Voltage selection

One Year Warranty

If you have any questions regarding this product or any other DIGIPOWERâ product please e-mail digipowersolutions@mizco.com or call toll free: (866) DG-POWER. Log onto digipowersolutions.com to see more about DIGIPOWERâ and our other fine products.

INSTRUCTIONS:

1. Before you power up your digital camera with the ACD-100, refer to our camera compatibility chart included with this package for your correct Voltage setting. If your camera is not listed on the compatibility chart included with this package, then contact DIGIPOWERâ

to check compatibility of the ACD-100 with your camera.

2. Select the appropriate Pin connector and attach it to the output socket at the end of the output cord.

3. Select your camera’s Voltage from the included compatibility chart and set the Voltage dial on your ACD-100to your camera’s setting. To do this, remove the selector tool from the side of the adaptor (or use a mini flathead screwdriver) and use it to turn the dial (Figure 1). Turn the dial until the arrow is pointed directly at the Voltage listed next to your camera model on the chart.

4. Once you have attached the correct Pin Connector and set the correct Voltage, you may plug the adaptor into your wall outlet. The LED shows power is on.

5. Now you may plug the Pin connector to your camera’s DC in jack and power up your Digital Camera.

6. The ACD-100Universal AC power supply is multi voltage (100V-240V) and may be used in any country. Do not attach any voltage converters to this adaptor.