All brands represented herein are registered trademarks of their respective manufacturers.
Todas las marcas representadas aquí son marcas comerciales registradas de sus fabricantes respectivos. Toutes les marques représentées ici sont des marques déposées de leurs fabricants respectifs.
Declaration of Conformity with FCC Rules for Electromagnetic Compatibility
We, Mizco International, Inc., of 80 Essex Ave East, Avenel, NJ 07001, declare under our sole responsibility that the product
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Mizco International, Inc., is not responsible for any interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate this equipment.
ICES
This Class B digital apparatus complies with Canadian
Declaración de conformidad con los reglamentos de la FCC para compatibilidad electromagnética
Nosotros, Mizco International, Inc., de 80 Essex Ave East, Avenel, NJ 07001, declaramos bajo nuestra responsabilidad única que el producto
Este equipo ha sido probado y se encontró que cumple con los límites establecidos para un dispositivo digital Clase B, de conformidad con la sección 15 de las reglas de la FCC. Estos límites están diseñados para ofrecer una protección razonable contra interferencia perjudicial cuando el equipo se opera en una instalación residencial. Este equipo genera, usa y puede emitir energía de radio frecuencia y si no se instala y usa de acuerdo con las instrucciones podría provocar interferencia perjudicial a las comunicaciones de radio. Sin embargo, no hay garantía de que dicha interferencia no ocurrirá en una instalación en particular. Si este equipo ocasiona interferencia perjudicial a la recepción de radio o televisión, lo cual se puede determinar apagando y encendiendo el equipo, se sugiere que el usuario trate de corregir la interferencia mediante una de las siguientes medidas:
•Colocar u orientar la antena receptora en otro lado.
•Aumentar la separación entre el equipo y el receptor.
•Conectar el equipo una salida o circuito distinto al que está conectado el receptor.
•Consultar a su proveedor o un técnico de radio o televisión con experiencia para que le ayuden.
Mizco International, Inc. no es responsable por cualquier interferencia causada por modificaciones no autorizadas a este equipo. Dichas modificaciones podría invalidar la autorización del usuario para operar este equipo.
ICES
Este aparato digital Clase B cumple con el
Déclaration de conformité à la réglementation FCC en matière de compatibilité électromagnétique
Nous, Mizco International, Inc., sis au 80 Essex Ave East, Avenel, NJ 07001, déclarons sous notre seule responsabilité que le produit
(1)cet appareil ne peut pas provoquer d’interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, y compris des interférences pouvant entraîner un fonctionnement non désiré.
Item No.
Wall Charger for Pocket Cams
Cargador de pared para cámaras de bolsillo
Chargeur mural pour caméras de poche
User guide • Guía del usuario • Guide d’utilisation
©2010 Mizco International, Inc. Avenel, New Jersey www.mizco.com tel: 800•266•4026
email: digipowersolutions@mizco.com
All rights reserved. Todos los derechos reservados. Tous droits réservés.
DIGIPOWER is a registered trademark of Mizco International Inc.
DIGIPOWER es una marca registrada de Mizco International Inc.
DIGIPOWER est une marque de commerce enregistrée de Mizco International, Inc.
1 year warranty garantía de año garantie d'un an
Cet appareil a été contrôlé et jugé conforme aux limites imposées pour les unités numériques de classe B, en vertu de l’alinéa 15 de la réglementation FCC. Ces limites visent à assurer une protection raisonnable contre les interférences en milieu résidentiel. Cet appareil génère, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et utilisé selon les instructions fournies, il peut causer des interférences dans les communications radio. Néanmoins, aucune installation n’est par définition exempte de ce phénomène. Si cet appareil cause effectivement des interférences nuisibles lors de la réception d’émissions radio ou télévisées (et il suffit, pour s’en rendre compte, d’allumer et d’éteindre l’appareil), l’utilisateur devra tenter de corriger ces interférences en prenant l’une des mesures suivantes:
•Réorienter ou changer la position de l’antenne réceptrice.
•Augmenter la distance entre l’équipement et le récepteur.
•Brancher l’équipement sur une prise de courant appartenant à un circuit différent de celui sur lequel est branché le récepteur.
•Demander l’assistance du fournisseur ou d’un technicien de télé ou de radio expérimenté.
Mizco International, Inc., n’est pas responsable des interférences causées par des modifications non autorisées de cet équipement. De telles modifications peuvent rendre nulle l’autorisation accordée aux utilisateurs de se servir de cet équipement.
ICES
Ce périphérique numérique de classe B est conforme à la norme canadienne
User Guide | English |
Wall Charger for Pocket Cams
Thank you for purchasing the DigiPower wall charger for Pocket Cams. This product has been designed to provide fast charging times, Universal auto switching
This package includes a 1 meter (3.3 ft) charge/sync mini B cable, a 1 meter (3.3 ft) charge/sync USB extension cable, and a Flip Video charge adapter. The cables can be used to connect your pocket cam or other portable devices directly to your computer for charge and sync operations or connect to the included wall charger to power your devices wherever there is an AC outlet.
Wall Charger
USB extension cable
Flip Video Charge Adapter
Mini B USB Cable not pictured
1
Using the wall charger:
1.Plug the wall charger directly into an AC outlet; the blades are
2.Plug the USB connector into the wall charger and plug the other end into your pocket cam.
a.Important note: The small adapter that is included in this kit is required to charge Flip Video cameras from a USB power source other than a computer. Plug this adapter into the wall charger first for Flip Video cameras.
3.Your device should now indicate it is being charged. If it does not make sure the outlet is getting power (there may be a switch that controls the outlet).
4.This charger will work with any other portable device that charges via USB. It will require the specific charge cable for that device.
Troubleshooting
If an over voltage condition occurs the unit will stop working to protect your device. Unplug the charger, wait for 10 seconds then plug it back in. Continue to use as normal.
2
Technical Specifications:
AC Voltage input range:
Operating frequency: 50Hz ~ 60Hz
Output voltage: 5V
Output Current: 1A
Over voltage protection Short circuit protection
INCLUDES 1 METER (3.3 FT) CHARGE/SYNC MINI B CABLE, USB EXTENSION CABLE, and FLIP CHARGE ADAPTER
WARNING! IMPORTANT SAFETY INSTRUCTION!
Failure to read and follow these safety instructions could result in fire, electrical shock or other hazard, causing serious and/or fatal injury and/or property damage.
1.Do not modify, disassemble, open, or crush the product
2.Do not expose the product to rain or water
3.Keep away from open flame or sunlight to prevent heat
4.This product is not a toy. Keep away from children. Insure that all persons who use the product read and follow these warnings and instructions.
Limited Warranty
Mizco’s responsibility with regard to this limited warranty shall be limited solely to the repair or replacement at its option, of any product, which fails during normal consumer use for a period of 1 Year from the date of purchase. This warranty does not extend
to damage or failure, which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. If at any time during the 1 Year period following the purchase the product fails due to defects in materials or workmanship, return the defective product with freight prepaid and proof of purchase.
All brands represented herein are registered trademarks of their respective manufacturers. Design and specifications are subject to change without notice.
3
