TROUBLE SHOOTING
During operation
Problems |
|
| Possible Causes | Solutions | Page |
The shutter release won’t | 1 | “ | ” symbol is blinking. | 1 Replace the battery with a new one. | 12 |
trip. | 2 Power switch is not on. | 2 Press the POWER button. | 11 | ||
| 3 Is “ ” blinking on the LCD? | 3 The flash is charging. Wait until “ ” stops blinking | 23 | ||
|
|
|
| and is displayed. (The flash takes approx. 6 sec- |
|
|
| “ ” is lit on the exposure counter. | onds to charge.) | 17 | |
| 4 | 4 Remove the film, and load an unexposed film. | |||
|
|
|
|
| |
After loading the film and | ● | Did you pull the end of the film out to | ● Pull the end of the film out to the FILM TIP mark | 17 | |
closing the camera back, |
| the FILM TIP mark when loading the | and correctly load the film. |
| |
the exposure counter is |
| film? |
|
|
|
not displayed. |
|
|
|
|
|
The film rewound during | ● | Did you move the camera back lock | ● Be sure not to move the camera back lock while | 28,30 | |
photographing. |
| while a film was loaded? | film is loaded in the camera. When removing the |
| |
|
|
|
| film, check that the motor has stopped and that |
|
|
|
|
| “ ” is displayed before opening the camera back. |
|
After loading a film and | ● | Did you remove film without rewinding | ● After removing the film, remove the battery, press | 28 | |
closing the camera back, |
| it after you began photographing? | the POWER button, and check that the exposure |
| |
the numerals on the expo- |
|
|
| counter is no longer displayed. Then insert the |
|
sure counter blink. |
|
|
| battery again. |
|
The | ● | Is the date correction mode on? | ● Cancel the date correction mode. | 13 | |
set. |
|
|
|
|
|
“ ” is blinking and the shut- | ● | The camera is broken. | ● Please contact a FUJIFILM authorized distributor. |
| |
44 ter can not be released.
