Control of Zoom Maximum Speed
By means of the zoom maximum speed control knob the zoom maximum speed can be changed in seven steps. Rotate the knob clockwise to increase the speed.
2. QuickZoom Operation
In quickzoom operation, pressing a switch moves the zoom to the tele end quickly. The operator can use this function in such occasions listed below.
•When rapid zooming to the tele end is required to focus on the object precisely.
•To confirm, in a moment, the composition of the image in the extreme close up shot.
Note: If the zoom limit function is used, the zoom will stop at the zoom limit positions. In this case, the zoom may not reach the tele end or the wide end.
Operation
a.Set the zoom servo/manual select knob to “S”.
b.Keep pressing the quickzoom & auto cruising zoom switch until the zoom reached the tele end.
c.While pressing the quickzoom & auto cruising zoom switch, perform precise focusing or confirm the composition of the image in the extreme close up shot.
d.Release the quickzoom & auto cruising zoom switch. The zoom will move to it’s former position quickly. (If you press the quickzoom & auto cruising zoom switch again before the zoom returns to it’s former position, the quickzoom movement restarts. After this operation, if the switch is released, the zoom will move to it’s former position quickly.)
Note 1. By setting an appropriate switch in the area of “Function & Mode Select Switches” (refer to illustration on page 8), the return switch and the VTR switch can be used also as a quickzoom & auto cruising zoom switch.
2
