Zoom Preset Operation
In this operation, the zoom moves to a predetermined position by pressing a switch.
Setting Zoom Preset Operation Mode
a.Set the preset ON/OFF switch to ON. (The switch has been set to ON at the factory.)
b.Set the function switch to OFF. (The function switch has been set to OFF at the factory.)
c.Set the zoom servo/manual select knob to “S.”
Storing Preset Position
a.Set the zoom position by operating the zoom seesaw control lever.
b.While pressing the preset switch (MEMO), press the preset switch (ON).
Recalling Preset Shot
a.Press the preset switch (ON). The zoom will move to the predetermined position then stops. (During this operation, the shot recalling speed can be changed by means of the zoom maximum speed control knob.)
Zoom and Focus Simultaneous Preset Operation
In this operation, the zoom and focus move to their predetermined positions simultaneously by pressing a switch.
Installing of Optional Accessories
For zoom and focus simultaneous preset operation, the following accessory is required. Install it on the lens referring to it’s operation manual.
•Focus Position Demand Unit
Setting Zoom and Focus Simultaneous Preset Operation Mode
a.Set the preset ON/OFF switch to ON. (The switch has been set to ON at the factory.)
b.Set the function switch to ON.
c.Set the zoom servo/manual select knob to “S.”
d.Set the focus servo/manual select knob to “S.”
Storing Preset Position
a.Setting Zoom Position – Set the zoom position by operation the zoom seesaw control lever of the lens.
b.Setting Focus Position – Set the focus position by operation the focus control knob of the Focus Position Demand Unit.
c.While pressing the preset switch (MEMO) of the lens, press the preset switch (ON).
7
