Digital Antenna 4KSBR-50U operation manual Read instructions completely before attempting install

IMPORTANT

Read instructions completely before attempting install!

1. Package Contents

Part Number	Description
DA4000SBR	Dual Band Wireless Cellular Amplifier/Repeater
288-PW	Outside omni-directional 9dB gain dual band cell antenna
135-RD	Inside omni-directional dual band cell antenna with 6’ cable
DP515	Microprocessor controlled 12 VDC to 5 VDC power cable
DP255	110-240 VAC to 5 VDC power supply
340-50NM	50' DA340 low loss cable
DH288	Stainless steel mounting hardware: qty 2 U-bolts, nuts, washers; qty 4
	philips head screws

2. Important Safety Information

The 4KSBR-50U system complies with all FCC, IC, UL rules, regulations and codes. Follow all guidelines in the installation and instruction manual and read completely before beginning the installation procedure. Do not deviate or disregard any of the safety features included in the manual or with the equipment, nor operate the system in an unintended manner.

WARNING!

Only Digital Antenna authorized products may be used with the 4KSBR- 50U system. Using unauthorized equipment with the 4KSBR-50U system will harm the system, voids the warranty and can be detected in the event of a failure.

WARNING!

Do not install antenna near power lines. Contact with any high voltage power lines could result in shock or loss of life.

WARNING!

Handle all electronic parts with care. Dropping or mishandling the DA4000SBR amplifier/repeater, antennas or power supplies can damage sensitive RF and electronic components.

DO NOT TURN AMPLIFIER ON

UNTIL ANTENNAS ARE SECURELY

ATTACHED TO AMPLIFIER AND

PROPERLY SEPARATED

3