Installing a MAU in a DEChub 900 MultiSwitch

When you install a MAU in a DEChub 900 MultiSwitch, you do not have to turn off the hub power.

￿Remove the single-slot hub (if necessary).

If you want to install a DEChub ONE MAU 900TL in a hub, you need to remove the single-slot hub.

a. Loosen the screw on the single-slot hub until it disengages.

b. With one hand holding the front of the MAU, and your other hand holding the single-slot hub, carefully pull the two units apart.

2Install the MAU in the hub.

The release lever is lifted and clicks back into place

as the module is seated.

a.Align the MAU's 48-pin connector with any available 48-pin slot on the hub.

b.Place the MAU's bottom mounting tab into the mounting slot on the hub.

c.Rock the MAU into place. You hear a ``clickº when the MAU is seated.

Mounting tab

LKG±8139-93I

DECmau 900TL

5

Page 5
Image 5
Digital Media 900TL manual Installing a MAU in a DEChub 900 MultiSwitch, Remove the single-slot hub if necessary