Digital Media 900TL manual Install a MAU to adjacent MAUs or repeaters, Check LEDs

Installing a DEChub ONE MAU 900TL (continued)

4Connect station cables.

Connect station cables to any available lobe connector on the MAU. For

150-ohm applications, you also need an impedence matching transformer cable (Digital part number BN26T-03).

5Install a MAU to adjacent MAUs or repeaters.

If a MAU is being added to an existing

network, connect Ring In to the Ring Out connector of a MAU or repeater, and

connect Ring Out to the Ring In connector of a MAU or repeater.

6Check LEDs.

With power on, verify that the Power and

Module OK LEDs are on.

Module￿ installation￿ for￿ a￿ DEChub￿ ONE￿ MAU￿ 900TL is￿ complete.

LKG±8143-93I

8 DECmau 900TL