Digital Stream DST-HD1100E 1.2Rear Panel Jacks, ①VIDEO OUT, ⑥S-VIDEOOUTPUT, ③RF INPUT (75 Ohm), ⑤Display Format Selector, ④DTV Output Selector(Monitor/Y, PB, PR)

DST-HD1100E HDTV DIGITAL RECEIVER

1.2Rear Panel Jacks

① ② ③

④ ⑤ ⑥ ⑦ ⑧⑨ ⑩ ⑪ ⑫ ⑬

①VIDEO OUT

If your TV or monitor has Audio/Video capability, connect this jack to the AV Input jack on your TV or monitor using an Audio/Video cable.

②Left/Right ANALOG-AUDIO OUTPUTS(with Digital Video Output)

Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these terminals when you use YPbPr or RGB for video.

③RF INPUT (75 Ohm)

Connect the antenna here

④DTV Output Selector(Monitor/Y, PB, PR)

Connect to the Y-PB-PR/RGB digital video input of a digital-compatible TV set (or the Y-PB-PR/RBG inputs of some other video component).

⑤Display Format Selector

Switches between 1080i (interlaced scanning), 720p (progressive scanning), 480p (progressive scanning), and 480i (interlaced scanning) formats. (For HDTV broadcasts, 1080i is usually the best setting.)

⑥S-VIDEO OUTPUT

If your TV or monitor has S-Video capability, use this jack along with the Audio/Video jacks to connect the HDTV Digital Receiver to your receiver.

5