Digital Stream DST-HD1100E ⑬Power Switch, ⑨SPDIF Output(Coaxial), ⑫Upgrade Port (RS232C), ⑪PC Monitor Output (R,G,B FORMAT), ⑩SPDIF Output(Fiber optic connector)

DST-HD1100E HDTV DIGITAL RECEIVER

⑦Left/Right ANALOG-AUDIO OUTPUTS(with Analog Video Output)

Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these terminals when you use analog for video.

⑧DTV OUT COMPONENT (Y, PB, PR format)

Connect to the Y-PB-PRdigital video input of a digital compatible TV set (or the Y-PB-PRinputs of some other

video component).

⑨SPDIF Output(Coaxial)

Connect this terminal to the digital audio input of a TV set.

⑩SPDIF Output(Fiber optic connector)

Connect this terminal to the digital audio input of a TV set (i.e., to a TV set that has a fiber-optic connector for digital audio). Or, connect this terminal to the digital audio input of a separate component (i.e., Dolby Digital-AMP..).

⑪PC Monitor Output (R,G,B FORMAT)

Connect to the R, G, B inputs of a TV set, computer monitor, or some other video component.

⑫Upgrade Port (RS232C)

It is used for firmware upgrade. DO NOT USE THIS PORT AT ANY TIME!

⑬Power Switch

Press the switch to turn the power on or off

6