Tap Tempo Delay
The HardWire Delay/Looper’s Foot Switch can be used as a Tap Tempo switch for setting the delay time during a live performance.
To access Tap Tempo, do the following:
1.While the delay effect is bypassed, press and hold the Foot Switch for 3 seconds.The effect turns on and the Indicator LED lights solid RED. After 3 seconds of holding the Foot Switch, the Indicator LED begins flashing GREEN.The flashing GREEN LED indicates Tap Tempo mode is now active and the LED flashes at the current delay time’s duration.
2.Tap the Foot Switch at least two times to set a new delay time.The last two pedal tap intervals set the delay time.The TIME knob is disabled when Tap Tempo is active, and the delay cannot be bypassed until the Tap Tempo is exited.
3.To exit Tap Tempo, press and hold the Foot Switch for 3 seconds until
