nect the cable from the Input 1 (Mono) jack when not in use. If the optional Harman PS200R power supply is used, cables can remain connected.
7.Input 2 - Connect a second input to this jack for stereo operation. Input 1 and 2 are processed separately through the stereo delay effect and then fed to Outputs 1 and 2 to keep true stereo separa- tion between channels.
8.Foot Switch Release Pins - These two pins are spring loaded hinges that hold the Foot Switch in place. See page 16 for informa- tion on accessing and changing the battery. See page 12 for more information on using and changing the Tails Switch settings.
9.Indicator LED - Lights when the effect is turned on. When bat- tery power is low (approximately 15 minutes before it dies), the Indicator LED begins to dim giving you advanced warning that very shortly you will need to replace the battery.
