Aquatic Fitness System

2003 Owner’s Manual

 

 

 

 

 

 

 

 

 

Symptom (Cont)

 

Problem

 

 

Corrective Action

 

 

 

 

 

 

 

No action required unless the water

 

 

 

 

High temperature condition:

 

 

temperature fails to return to acceptable

 

 

 

 

 

 

levels – in which case, call your dealer for

 

 

 

 

Do not enter the spa water. The water

 

 

 

 

 

 

 

 

service.

 

 

 

 

temperature is above acceptable limits.

 

 

 

 

 

 

 

 

 

 

 

 

 

Water temperature has reached 110°F

 

 

 

 

 

 

 

(43.3°C.) The air blower and low speed

 

 

 

 

 

 

 

pump are activated to assist in lowering

 

 

 

 

 

 

 

water temperature.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Call your dealer for service.

 

 

 

 

High limit condition:

 

 

 

 

 

 

 

Do not enter the spa water.

 

 

 

 

 

 

 

The water temperature has reached 118°F

 

 

 

 

 

 

 

(47.8°C.) The entire system is disabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AquaFit™Dual Temp (Spa-Side)

 

 

 

 

 

 

 

 

 

 

Symptom

 

Problem

 

 

Corrective Action

 

 

 

 

“OH” on LED Digital Display

 

 

1. Remove the cover and allow the

 

 

 

 

Window

 

 

 

 

 

 

 

 

 

 

water to cool.

 

 

 

 

High Temperature Condition:

 

 

2. Reset the power to the spa by

 

 

 

 

 

 

resetting the GFCI breaker.

 

 

 

 

Do not enter spa water. The water

 

 

 

 

 

 

 

 

 

 

 

 

 

temperature is above acceptable limits.

 

 

No further action is required unless the

 

 

 

 

The water temperature has reached

 

 

 

 

 

 

 

 

water temperature fails to return to

 

 

 

 

110°F (43.3°C.). The system will shut

 

 

 

 

 

 

 

 

acceptable levels – in which case, call

 

 

 

 

down.

 

 

 

 

 

 

 

 

your dealer for service.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Flashing Lights AND

 

 

 

 

 

 

 

“OH” on LED Digital Display

 

 

Call your dealer for service.

 

 

 

 

Window

 

 

 

 

 

 

High Limit Condition:

 

 

 

 

 

 

 

Do not enter spa water. The water

 

 

 

 

 

 

 

temperature is above acceptable limits.

 

 

 

 

 

 

 

The water temperature has reached

 

 

 

 

 

 

 

118°F (47.8°C.). The system will shut

 

 

 

 

 

 

 

down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Flashing Lights

 

 

If the error is not resolved after

 

 

 

 

 

 

 

 

 

 

 

 

System Error:

 

 

resetting the spa, call your dealer for

 

 

 

 

 

 

 

 

service.

 

 

 

1.

Check the water level

 

 

 

 

 

 

2.

Clean the filters.

 

 

 

 

 

 

3.

If the problem persists, reset the

 

 

 

 

 

 

 

 

power to the spa by resetting the

 

 

 

 

 

 

 

 

GFCI breaker.

 

 

 

 

 

 

 

 

 

 

 

 

 

37

Page 41
Image 41
Dimension One Spas 2003 manual AquaFitDual Temp Spa-Side, High temperature condition