Aquatic Fitness System

2003 Owner’s Manual

Filter Cycles

Standard Mode

Standard Mode heating is automatically controlled by the loss of water temperature. If the spa water drops

2°F (1.1°C) below the set temperature, the low speed pump and the heater will automatically turn on. They will both remain on until the water temperature reaches the temperature set point.

In this mode, the filter cycle operates independently of the need for heat to ensure proper filtration.

Set the display to F1 to receive two (2) hours of filtration twice a day. To select filter cycle F1, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see F1 displayed in the window.

You have now successfully selected to receive two (2) hours of filtration twice a day and maintain your water temperature separately. The programming mode will automatically store your choice and exit if you don’t make another change within three (3) more seconds.

Set the display to F2 to receive two (2) hours of filtration three times a day. To select filter cycle F2, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see F2 displayed in the window.

You have now successfully selected to receive two (2) hours of filtration three times a day and maintain your water temperature separately. The programming mode will automatically store your choice and exit if you don’t make another change within three (3) more seconds.

Set the display to F3 to receive two (2) hours of filtration four times a day. To select filter cycle F3, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see F3 displayed in the window.

You have now successfully selected to receive two (2) hours of filtration four times a day and maintain your water temperature separately. The programming mode will automatically store your choice and exit if you don’t make another change within three (3) more seconds.

14

Page 18
Image 18
Dimension One Spas 2003 manual Filter Cycles, Standard Mode