Dimension One Spas 2003 manual Light Bulb Replacement

Aquatic Fitness System

2003 Owner’s Manual

Light Bulb Replacement

All systems are equipped with a 12-volt light using a GE912 bulb. To change the bulb:

1.Turn the power off and drain the system below the level of the light.

2.Using the special tool provided in the owner’s manual packet, unscrew the cover for the light housing.

3.Remove the old bulb and install the new bulb.

4.Use the special tool to replace the cover for the light housing.

5.Check to ensure proper operation of the new bulb before refilling the system.

Do not attempt to remove the light housing cover without lowering the water level below the light housing cover.

Do not attempt to remove the light housing cover without the special tool. If you are not able to locate it, contact the Dimension One Spas’ Service Department to have one sent.

Be sure the O-ring is not damaged and is properly in place when replacing the lens. Contact Dimension One Spas if a replacement O-ring is needed.

A Dynamic L.E.D. Light is available as an optional accessory for many models. This light is preprogrammed with 13 different light shows. This light is also replaced in the same manner as described in the previous paragraph. Contact your dealer or visit our Virtual Showroom at http://www.d1spas.com to see if it is available for your model.

26