18 www.dimplex.com
Operation
The manual controls for the
electric replace are located on
the right side of the unit and inside
the air intake slot (Figure 18).
In “ OFF ” mode, power to all
functions is cut off.
In “ MANUAL ” mode, the
replace's three levels of
operation are controlled by the
manual Control buttons.
C. Manual Control Buttons
The manual Control buttons
operate the replace levels
sequentially (from off): ames
only; to ames and low heat; to
ames and high heat.
The level is increased every time
the “ I ” button is pressed, and the
replace can be turned off at any
point by pressing the “ O ” button.
Resetting the Temperature Cutoff Switch
should the heater overheat, an
automatic cut out will turn the
replace off and it will not come
back on without being reset. It
can be reset by switching the on/
off switch to off and waiting ve
(5) minutes before switching the
unit back on.
CAUTION: If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DImPLEX
(1-888-346-7539).
Figure 18
CB A
A. On/Off Switch
The on/off switch supplies power
to all replace functions. When
the switch is in the “ I ” position,
the unit is on. When in the “ O ”
position, the replace is off.
B. 3-Position Switch
The 3-Position switch changes
the mode the replace operates
in and has three (3) positions:
“ MANUAL ”; “ OFF ”; and “
REMOTE ”.
When in “ REMOTE ” mode,
the replace's three levels of
operation are controlled by the
ON and OFF buttons of the
remote control.