RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on.
CAUTION
If you need to continuously reset the heater, unplug the unit and call customer service at
MAINTENANCE
WARNING: Always disconnect from the power supply before attempting any maintenance. Bulb Replacement - see Fig.’s 3, 4 and 5 The bulbs are located behind the back panel. To gain access to the bulbs, the screws indicated in Fig. 3 (4 screws) which secure the back panel, mustt be removed.
Remove and slide out panel as indicated on Fig. 4. Remove the defective lamp by unscrewing it as shown in Fig. 5.
Replace with a 60W E12 clear chandelier or candelabra. Take care not to
7