3.2 Control Box
The control box is integrated in the heat pump. It can be folded downward after removing the lower front panel and loosening the fastening screws located at the top on the right.
The control box houses the mains terminals as well as the power contactors and the soft start unit.
The plug connector for the control lead is located at the bottom of the unit in the immediate vicinity of the line
3.3 Heat Pump Controller
For the operation of your reversible
he heat pump controller is a comfortable electronic regulating and control unit. It controls and monitors the entire heating/cooling system as a function of the outdoor air temperature, the hot water preparation and the safety devices.
The external temperature sensor, to be mounted by the customer, incl. fastening hardware is shipped with the controller.
Method of functioning and operation of the heat pump controller are described in the enclosed operating manual.
SCOPE OF DELIVERY
TRANSPORT
4TRANSPORT
CAUTION! During transport, the heat pump must not be tilted more than 45° (in either direction).
The unit should be transported to the final installation site on a wooden pallet. The baseline unit can be transported either by means of a lift truck, a sack trolley, or the like, or using 3/4" pipes to be put through the openings provided in the base plate or the frame.
CAUTION! The heat pump and transport pallet are only connected by the packaging film.
It is necessary to remove the lower cover panel to be able to access the transport openings in the frame. For this purpose, loosen two screws each in the base, retract the panels and disengage them at the
3.
3.
1. 
1. | 2. |
Opening the cover
1.
1.
2.
2. 1.
Closing the cover
top. When reinstalling the panels, they should be pushed upward by exerting slight pressure.
When slipping the carrying pipes through the frame, care must be taken that no components are damaged.
5
