Thermal overload protection
This appliance is protected by a thermal safety cutout which will operate to isolate the electricity supply if, for example, the heater surfaces or grille are obstructed to cause overheating.
The cutout should not operate if the instructions given in this leaflet and clearances regarding positioning are strictly followed.
However, if the cutout has operated before following the instructions below determine the cause of the cutout operating. If the heater has not obviously or inadvertently been misused - e.g. covered - it will be necessary to have the appliance fully checked by a Dimplex Service Agent. (A list of Dimplex Service Agents is enclosed in the leaflet envelope and should be retained by the user).
OPERATING INSTRUCTIONS
SAFETY INSTRUCTIONS | CLEANING |
1.Ventilate rooms well during commissioning
2.Do not move the heater in any way once installed without the services of a competent electrician.
3.Do not cover the heater with clothing etc. at any time or position furniture close to or against the heater.
4.Ensure a clearance of at least 150mm between heaters and curtains.
ALSO REFER TO COVER PAGE
AUTOMATIC OPERATION
Dimplex XL6N and XLS6N Storage Heaters store heat overnight using cheap off peak electricity and discharge this heat the following day. The XL6N is preset at the factory to always take a full charge. XLS6N models are fitted with an external sensor which measures room temperature and adjusts the input to the heater automatically, thus ensuring the most effective use of electricity. These operating instructions assume that the correct size of storage heaters have been selected to cater for the heating requirements of the room.
To maintain the appearance of the heater wipe occasionally with a dry cloth when the heater is cool.
Do not use abrasive powders of furniture polish.
AFTER SALES SERVICE
Your Dimplex Storage Heater is guaranteed for one year from date of purchase. We undertake to exchange or repair within the period, any part found to be defective due to a manufacturing fault (applies in the UK only). This guarantee in no way prejudices your rights under common law.
Should you require after sales service, please get in touch with the supplier through whom you purchased the appliance, or your nearest Service Agent.
Please do not return a faulty appliance or part of an appliance to us as this may result in transit damage and/or delay in providing service. Let us know your difficulty quoting the model number and serial number of the appliance. We will then take the appropriate action.
This appliance complies with the European Standards EN 60 |
|
EN |
|
These standards cover the requirements of the EMC Directives 89/336 & 73/23. | 83708 Issue 3 : February 2002 |
Glen Dimplex (UK) Ltd | Millbrook House | Customer Help Line | 0870 7270 101 |
| Grange Drive | Product Sales | 0870 7270 103 |
| Hedge End | Head Office | 0870 0777 117 |
| Southampton |
|
|
| Hampshire | ||
| SO30 2DF |
|
|
