Manuals / Directed Audio / Car Audio and Video / Car Amplifier

Directed Audio D1200, D2400 owner manual Learn TX IDs, Until the on appears, ESP Status Indicator

Models: D2400 D1200

1 26
Download 26 pages 55.27 Kb
Page 13
Image 13

unlit, but still indicates service codes or faults using the top light.

9.Learn TX IDs

Default Off. Before the unit will respond to Arm/Disarm/Valet Commands from the alarm system, it needs to establish communica- tions with this alarm system. This is established using the learn routine procedure described below. Once this procedure is performed, the unit will store this information permanently in memory. The proce- dure only needs to be repeated if the alarm unit is replaced or all the transmitters in an alarm system are replaced.

10.Major Version Number: This number will allow verification of the firmware installed in the amplifier. This will be useful information should your amplifier ever need service.

11.Minor Version Number: This number references the minor version of your amplifier firmware.

To perform a transmitter "learn":

1.Connect Bitwriter® to amplifier. Press READ on the Bitwriter®.

2.Press the up arrow 3 times, or the down arrow 8Light On, W/O Service Code times to reach the Learn TX IDs menu. Press 'Select'

until the ON appears.

3.Press the write key twice. The ESP® status indicator should begin blinking.

Note: The following should be accomplished within 20 seconds or the learn session will time out. If this occurs, the LED will stop blinking. Reconnect the Bitwriter® and press WRITE twice to re-enter the TX ID Learn mode.

4.Disconnect the Bitwriter® and connect the Amp to the alarm cable.

5.Press ARM on any transmitter attached to the alarm system. The LED should go on if the amplifier was on prior to TX ID or go out if the amplifier is off.

Note: When the amplifier receives ESP® bus activity(typically either arm or disarm signals, it will blink to indicate Arm or Disarm commands. This allows the installer to verify that the proper cable is in use and that the transmitters have been properly programmed. The unit must still be programmed to respond to Valet and Arm commands with a Bitwriter® for the Anti-theft/Valet modes to lock out unauthorized operation.

ESP® Status Indicator:

© 2005 Directed Electronics, Inc. all rights reserved

13

Page 12 Page 14
Page 13
Image 13
Directed Audio D1200, D2400 owner manual Learn TX IDs, Until the on appears, ESP Status Indicator
Page 12 Page 14

D2400, D1200 specifications

The Directed Audio D1200 and D2400 are advanced car audio amplifiers designed to deliver exceptional sound quality and performance. These models are engineered for audio enthusiasts seeking powerful and reliable amplification solutions capable of enhancing their in-car audio experience.

The Directed Audio D1200 is a compact and lightweight amplifier, equipped with a high-efficiency class D architecture. This design allows it to produce 1200 watts of peak power while minimizing heat generation, making it suitable for a wide range of audio systems without compromising performance. The amplifier features a low-pass filter that helps in controlling the frequency response, ensuring that low-frequency sounds are delivered with clarity and depth. Additionally, its variable gain control allows users to tailor the output levels to their individual preferences, ensuring a personalized listening experience.

On the other hand, the Directed Audio D2400 takes power and performance a notch higher, boasting an impressive 2400 watts of peak power. This amplifier is also designed with class D technology, providing efficient operation and reducing power consumption. The D2400 comes equipped with advanced thermal management features, ensuring that it remains cool during extended use. Its built-in crossover options enable users to achieve precise sound tuning, allowing for optimal integration with subwoofers and other speaker components.

Both models incorporate innovative technologies aimed at enhancing audio fidelity. They feature high-quality signal processing, ensuring that sound remains clear, even at high volumes. The amplifiers are engineered with low distortion levels, providing accurate sound reproduction across various musical genres. Additionally, they include short circuit and overcurrent protection systems, which safeguard the amplifiers against potential damage.

Other key characteristics of the Directed Audio D1200 and D2400 include their robust construction, designed for durability and long-lasting performance. Their stylish designs make them a suitable addition to any audio setup, while the compact form factor ensures easy installation in diverse vehicle types.

In summary, the Directed Audio D1200 and D2400 amplifiers exemplify a commitment to delivering powerful, high-quality audio performance. With advanced technologies and user-friendly features, these amplifiers are ideal for anyone looking to elevate their car audio experience to new heights. Their blend of efficiency, power, and sound fidelity makes them standout choices in the competitive market of car audio amplification.