Manuals / Directed Audio / Car Audio and Video / Car Amplifier

Directed Audio D1200, D2400 owner manual To the other, Status indicator will not flash

Models: D2400 D1200

1 26
Download 26 pages 55.27 Kb
Page 11
Image 11

to the other.

Bitwriter® commands can control para- meters such as Turn on Delay, Fan Control, Input Gain adjustment, and also place the amplifier into a monitoring state for commands from an ESP2 equipped alarm.

1.Turn-On Delay - 0.75, 1.00, 1.25, 1.75, 2.25, 2.75, or 3.25 seconds. 1.75 seconds is the factory default setting.

2.Fan Control - AUTO - The fan will automatically turn on when the internal temperature exceeds approximately 40 deg C. The ON option causes the fan to operate whenever the Amplifier is on. Use the ON option if you are using the external FAN port to drive optional LED tubes. In the OFF mode the external FAN port is disabled.

3.Service Code Display - The Directed ESP® Engine stores up to seven previous faults for later replay. The Service Code Display allows the installer to step through the fault history.

-OFF - In the OFF position, the amplifier operates normally.

-FLASH CODE ON LED - the last recorded fault is "replayed" on the ESP® Indicator LED. If the unit has never recorded a fault, the ESP®

Status indicator will not flash.

-RESERVED - no function, reserved for future use.

-CLEAR LAST FAULT - Clears the last fault. Note that this allows you to see previous faults prior by back- stepping one at a time through the fault history.

4.Input Gain Range - The sensitivity on the gain control can be limited to specific ranges. The DEFAULT position allows adjustment over the full range of amplifier sensitivities. There are 4 other ranges 0.5-1.0V, 1.0V-2.0V, 2.0-4.0V, 4.0-8.0V.

5.Input Gain Adjustment - In the LOCK position, the gain range and gain control can be locked out to prevent accidental mis-adjustment. The Default mode is UNLOCKED.

6.Valet - Selecting ENABLE allows the amplifier to monitor valet signals from the alarm system. The ampli- fier will not power up once remote power is removed when the Valet monitoring mode is ENABLED and the alarm system has been set into Valet mode.

Note: To make use of the Anti-theft or Valet features, the amplifier must "learn" which transmitters are asso- ciated with the currently used alarm system. See item 8 below.

© 2005 Directed Electronics, Inc. all rights reserved

11

Page 10 Page 12
Page 11
Image 11
Directed Audio D1200, D2400 owner manual To the other, Status indicator will not flash
Page 10 Page 12

D2400, D1200 specifications

The Directed Audio D1200 and D2400 are advanced car audio amplifiers designed to deliver exceptional sound quality and performance. These models are engineered for audio enthusiasts seeking powerful and reliable amplification solutions capable of enhancing their in-car audio experience.

The Directed Audio D1200 is a compact and lightweight amplifier, equipped with a high-efficiency class D architecture. This design allows it to produce 1200 watts of peak power while minimizing heat generation, making it suitable for a wide range of audio systems without compromising performance. The amplifier features a low-pass filter that helps in controlling the frequency response, ensuring that low-frequency sounds are delivered with clarity and depth. Additionally, its variable gain control allows users to tailor the output levels to their individual preferences, ensuring a personalized listening experience.

On the other hand, the Directed Audio D2400 takes power and performance a notch higher, boasting an impressive 2400 watts of peak power. This amplifier is also designed with class D technology, providing efficient operation and reducing power consumption. The D2400 comes equipped with advanced thermal management features, ensuring that it remains cool during extended use. Its built-in crossover options enable users to achieve precise sound tuning, allowing for optimal integration with subwoofers and other speaker components.

Both models incorporate innovative technologies aimed at enhancing audio fidelity. They feature high-quality signal processing, ensuring that sound remains clear, even at high volumes. The amplifiers are engineered with low distortion levels, providing accurate sound reproduction across various musical genres. Additionally, they include short circuit and overcurrent protection systems, which safeguard the amplifiers against potential damage.

Other key characteristics of the Directed Audio D1200 and D2400 include their robust construction, designed for durability and long-lasting performance. Their stylish designs make them a suitable addition to any audio setup, while the compact form factor ensures easy installation in diverse vehicle types.

In summary, the Directed Audio D1200 and D2400 amplifiers exemplify a commitment to delivering powerful, high-quality audio performance. With advanced technologies and user-friendly features, these amplifiers are ideal for anyone looking to elevate their car audio experience to new heights. Their blend of efficiency, power, and sound fidelity makes them standout choices in the competitive market of car audio amplification.