Savin 3699, 9980 manual How to Select the Line, G3 Line Selection, Auto Discriminate

Sending a Fax Message

❖G3 Line Selection

G4 communication always uses IS- DN, but G3 communication can use either PSTN or ISDN. There- fore, when connected to both PSTN and ISDN and selecting G3, you can choose which line to use.

How to Select the Line

Preparation

Store the Line Select function in a User Function key ({F1}-{F5}).⇒

P.211 “Assigning User Function

2 Note

❒When using G3 with ISDN, you can use the sub-address and UUI.

Keys”

AMake sure that the G3 indicator is lit.

❖Auto Discriminate

This function is for when G4 is se- lected. The machine first dials us- ing G4, but if the destination is PSTN, it switches automatically to G3.

Limitation

❒This function requires the op- tional G4 Unit.

Note

❒When the destination G3 uses TA (Terminal Identification) or is attached to a PABX, and con- nected to ISDN, it is detected as G4 and the machine does not switch to G3.

❖When you have stored the Line Select function in a User Function key

When the optional G3 Unit or op- tional G4 Unit is installed, you can store the Line Select function in

one of the User Function keys ({F1}-{F5}).

When sending a fax, pressing the User Function key enables you to select the line.

BPress the User Function key ({F1}-{F5}) with the Line Select function stored in it.

CPress the 01 keys to select the line.

DPress [OK].

66