Sending a Fax Message
56
2
❒If you are dialing with the num-
ber keys or Chain Dial (⇒ P.73),
you can select the line to use (G3
or G4).
Reference
P.67 “Dialing”
P.65 “Selecting the Line”
EPress the {
Start
} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
RTI or CSI in the machine of the
other party is shown on the dis-
play. When connected, the ma-
chine starts scanning the
document.
Reference
P.21
“Registering your RTI and
TTI”
After transmission the machine
will return to standby mode.
If the connection could not be made
AIf it was not possible to make a
connection with the number you
dialed (e.g. the line was busy or
there is a line problem), the fol-
lowing display will appear:
Redial and try and send the
message by Memory
Transmission
APress [
Mem Tx
].
To have the machine redial and
try and send the message by
Memory Transmission. All doc-
uments will be scanned into
memory then redialing will be-
gin.
To cancel this transmission
APress [
Cancel
].
The machine returns to the
standby mode.
Redialing with Immediate
Transmission
APress the {
Pause/Redial
} key.
BPress the {
Start
} key.
Transmission Result Report
If you turn this report on, a report will
be printed after every Immediate
Transmission so you have a record of
whether the transmission was suc-
cessful or not.