Sending a Fax Message
Transmission stores the document in memory, then dials the destina- tion. Parallel Memory Transmis- sion allows you to quickly determine whether a connection was made. In addition, this func- tion scans the document faster than Immediate Transmission and
2 is useful when you are in a hurry and need to use the document for another purpose.
Note
❒By default this feature is turned
on. You can change this with the User Parameters.⇒ P.236 “Changing the User Parameters”
Limitation
❒Standard Memory Transmis- sion is used instead of Parallel Memory Transmission in the following cases:
•When the line is busy and could not be connected to
•With Send Later
•With Transfer Request
•With Duplex Original
•When you store a document for Memory Transmission while another communica- tion is in progress
•When two or more destina- tions are specified
•When you send just an Auto Document
•With Image Rotation
❒If you press the {Stop} key, the document jams, or memory be- comes full during Parallel Memory Transmission, the ma- chine stops transmitting and prints the Communication Re- sult Report (Memory Transmis- sion). The file is erased.
❒Total stored page numbers are not printed with Parallel Memo- ry Transmission. Only the page numbers are printed, such as P.1, P.2 not 1/2, 2/2
Note
❒If you run out of memory, nor- mal Memory Transmission takes place. When and if this happens varies depending on the various options you have in- stalled.
File Reserve Report (Memory Transmission)
This report is printed after a docu- ment is stored in memory. It helps you review the contents and regis- tered destinations of documents stored for transmission. Even if the machine is set up not to print this re- port, it is still printed if a document could not be stored.
Limitation
❒This report is not printed for mes- sages sent using Parallel Memory Transmission.
Note
❒You can turn this report on and off. By default it is not printed.⇒ P.236 “Changing the User Parameters”
❒You can choose whether to include part of the document image on the
report (part of the image is printed by default).⇒ P.236 “Changing the User Parameters”
Communication Result Report (Memory Transmission)
This report is printed when a Memo- ry Transmission is completed so you
50
