Transmission Features
Note
❒Set the document within 60 sec- onds. If time runs out, an error will occur and transmission will not take place.
HPress the {Start} key.
Label Insertion
With this feature you can have the re- ceiver's name printed on the message when it is received at the other end. The name will be printed at the top of the page and will be preceded by “To”.
Limitation
❒If you select Label Insertion, the la- bel might be printed over a portion of the image when received at the other end.
❒To send just an Auto Document, start the following procedure from step B.
ASet the document you wish to send along with the Auto Docu- ment, and adjust scan settings as necessary.
B Specify the Auto Document to 2 send in one of the following ways:
•Press the Quick Dial it is stored in.
•Press the {Speed Dial} key and enter the code of the Speed Dial it is stored in.
CPress [Yes].
Auto Document
You can send an Auto Document along with another document, or just send it on its own.
Limitation
❒Although you can specify scan set- tings when sending an Auto Docu- ment, these settings will only apply to the document you send along with the Auto Document. The settings used when you scanned in and stored the Auto Document will apply to the Auto Document itself.
Note
❒If you send another document with an Auto Document, the Auto Document is sent first.
DDial the destination fax number.
EPress the {Start} key.
TTI/CIL Print
When you send using G3, your TTI is printed on faxes when received at the other end. When sending using G4, the CIL is printed on faxes at the other end.
83
