FRONT PANEL CONNECTIONS/CONTROLS

1.RCA Input Jacks - Accepts line level outputs from head units or signal processors at voltages between 150mV and 7.5 volts.

2.RCA Line Output Jacks - These pass through RCA jacks can be used to send the input signal to a second amplifier.

3.Slave/Master Switch - Controls whether the amplifier is a slave or master when connected in combined amplifier configurations. (Refer to the Combined Amplifiers section of this guide.)

4.Gain Control - Controls the ampli- fier’s sensitivity and is used to match the input level of the ampli- fier to the output level of the signal source.

5.Subsonic Switch - The subsonic filter attenuates frequencies below 30Hz by 24dB per octave.

6.Bass EQ Switch - Adds 8dB of bass boost to the subwoofer when selected.

7.Remote - Controls the subwoofer amplifier gain, from a remote loca-

tion for ease of adjustment during listening.

Warning: DO NOT connect a level control knob from other manufacturers to the Remote Sub Level Control of any Directed amplifier. Even though the connectors fit properly, the control knob and connector pin positions may be different and the amplifier will be damaged.

8.LPF Control - Controls low pass filter cutoff from 30Hz to 250Hz.

9.Phase Switch - 0° or 180° selec- table for switching the phase output to the woofer.

10.LED/FAN Connector - Allows connec- tion of an optional LED light bar or optional cooling fan for the amplifier.

11.Status LED - Will illuminate GREEN to indicate the amplifier is on and operating normally, and will be illu- minated RED if the amplifier shuts down due to short circuit, DC offset, or overheating detected by on- board protection circuitry.

12.ESP® Port - connection port for Bitwriter® or ESP2 security system.

13.ESP® Status LED - indicates ESP® functionality and is used to diagnose ESP® features.

© 2005 Directed Electronics, Inc. all rights reserved

7

Page 7
Image 7
Directed Audio D1200, D2400 owner manual Front Panel CONNECTIONS/CONTROLS, Tion for ease of adjustment during listening

D2400, D1200 specifications

The Directed Audio D1200 and D2400 are advanced car audio amplifiers designed to deliver exceptional sound quality and performance. These models are engineered for audio enthusiasts seeking powerful and reliable amplification solutions capable of enhancing their in-car audio experience.

The Directed Audio D1200 is a compact and lightweight amplifier, equipped with a high-efficiency class D architecture. This design allows it to produce 1200 watts of peak power while minimizing heat generation, making it suitable for a wide range of audio systems without compromising performance. The amplifier features a low-pass filter that helps in controlling the frequency response, ensuring that low-frequency sounds are delivered with clarity and depth. Additionally, its variable gain control allows users to tailor the output levels to their individual preferences, ensuring a personalized listening experience.

On the other hand, the Directed Audio D2400 takes power and performance a notch higher, boasting an impressive 2400 watts of peak power. This amplifier is also designed with class D technology, providing efficient operation and reducing power consumption. The D2400 comes equipped with advanced thermal management features, ensuring that it remains cool during extended use. Its built-in crossover options enable users to achieve precise sound tuning, allowing for optimal integration with subwoofers and other speaker components.

Both models incorporate innovative technologies aimed at enhancing audio fidelity. They feature high-quality signal processing, ensuring that sound remains clear, even at high volumes. The amplifiers are engineered with low distortion levels, providing accurate sound reproduction across various musical genres. Additionally, they include short circuit and overcurrent protection systems, which safeguard the amplifiers against potential damage.

Other key characteristics of the Directed Audio D1200 and D2400 include their robust construction, designed for durability and long-lasting performance. Their stylish designs make them a suitable addition to any audio setup, while the compact form factor ensures easy installation in diverse vehicle types.

In summary, the Directed Audio D1200 and D2400 amplifiers exemplify a commitment to delivering powerful, high-quality audio performance. With advanced technologies and user-friendly features, these amplifiers are ideal for anyone looking to elevate their car audio experience to new heights. Their blend of efficiency, power, and sound fidelity makes them standout choices in the competitive market of car audio amplification.