26

step 10

Testing the system

Once steps 1-9 have been completed, the operation of the system can be tested.

Place the two 30-amp fuses back into the relay satellite RED wire fuse holders. Make sure that the vehicle is in park with the

emergency brake on and the hood closed. Press and on the remote control simultaneously to initiate the remote start function. The parking lights should flash to confirm the remote start command has been received, The accessories and ignition should turn on followed by the starter cranking and the vehicle

engine running. Pressing and again simultaneously will shut the engine off.

© 2002 directed electronics, inc .

Page 29
Image 29
Directed Electronics 259D manual Testing the system