2. Choose. Within 10 seconds, press and release the Program switch the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the Program switch.
| Channel number | Function |
|
| 1 | Lock/Unlock |
|
|
|
|
|
| 2 | Timer Mode |
|
|
|
|
|
| 3 | Remote Start |
|
|
|
|
|
3.Transmit. While holding the Program switch, press the button on the transmitter
that you would like to control the selected receiver channel.
4. Release. Once the code is learned, the Program switch can be released.
You can advance from programming one channel to another by releasing the Program switch and tapping it to advance steps and then holding it. For instance: You have programmed Channel One and you want to program Channel Two. Release the
© 2002 directed electronics, inc . | 29 |
