33
© 2002 directed electronics, inc.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut
down the engine if the system receives any of the following shut-
down inputs:
The brake pedal is pressed.
The hood is opened.
The shutdown toggle switch is put into the ON position.
The pre-programmed run time has elapsed.
Buttons and are pressed again.
To shut down the remote start and turn off the engine:
Step on the brake pedal, or
Press and for one second.
timer mode
Timer Mode automatically starts the engine and runs it for a
pre-programmed time period, every three hours for a total of six
operation cycles. This feature helps to ensure that your engine
will start in the morning after a night of extremely cold temper-
atures.
To enter Timer Mode:
1. Start the vehicle by pressing and releasing and .
2. Press and release .
3. Within two seconds press and release and again.
important!This feature must only be used in open areas,
never in an enclosed area such as a garage.