Directed Electronics HCCA-D1200 warranty

10.Phase Control Switch - provides either 0 or 180 degree phase shift of the ampli- fied output (speaker) with respect to the input signal to facilitate bridging of amplifiers.

11.Power LED - when illuminated (green) indicates that the amplifier is on.

Protect LED - when illuminated (red) indicates that the amplifier protective cir- cuitry has been activated due to thermal, output short, supply undervoltage or supply overvoltage.

ESP® Indicator LED - when illuminated (yellow) indicates ESP® functionality and is used to diagnose ESP® features. The LED flash characteristics will assists in diag- nosing the type of fault (see Appendix).

NOTE: The LED on top of the amplifier may also illuminate and flash with the ESP® LED indicator, if this option has been enabled by your installer (requires Bitwriter®).

12. ESP® Port - connection port for Bitwriter® or ESP2 security system.

HCCA-D1200

1	2	3	4	5
				SPEAKER
FUSE	+BAT	REM	GND	+ + - -

HCCA-D2400

1		2		3	4	5
						SPEAKER
	FUSE		+BAT	REM	GND	+ + - -

HCCA-D5000

2	3	4	2	3	4	5
						SPEAKER
+BAT	REM	GND	+BAT	REM	GND	+ + - -

1.ATC Fuse - this fuse(s) protects the amplifier against internal electrical damage and is meant to protect the amplifier only. All other power connections should be fused at the source. The HCCA-D1200 has two 30-amp fuses. The HCCA-D2400 has three 40-amp fuses. The HCCA-D5000 has one inline 250-amp fuse.

4 © 2006 Directed Electronics, all rights reserved